TTLG|Thief|Bioshock|System Shock|Deus Ex|Mobile
Results 1 to 10 of 10

Thread: [Tutorial]Water Object with animation and flow effect

  1. #1
    Registered: Jan 2012
    Location: Gèrmany

    [Tutoria/Demol]Water Object with animation and flow effect -

    NEW!!!: GotTo Post New Ultimate Edition v3.11


    Old Stuff:
    This is also a tutorial I worked on four months ago but didn't published it as well.

    In this tutorial I want to explain to you how you can create an water object with animated surface textures including flow effect.
    For those who ask themselves why should I use an object based water. The answer is simple because it's an object and so you can move it, attach other object and and and.
    For those who think isn't that old stuff? I ask back is it really?
    Sure it's possible to have an animated object and it's possible to have a flow effect using conveyors but can you have both effects together? Conveyors with animated textures is sadly not possible or is it?
    Well yes it is and I explain how you can do that (or is there maybe another way?)
    So in the end we will have an object which looks like brush water with flow effect.
    Furthermore I explain how you can apply velocity to the player while hes in the water and how you basically build a movable water surface.

    To achieve this we make use of the render pass feature of NewDark via using .mtl files.
    In a smaller tutorial I explained how to make animated replacement textures. Check it out here: Link

    How to create an animated and flowing Water Object

    First if you just want a static none flowing water. You should stop reading here and use the search function because that is old stuff

    --Table of content--
    0.) Introduction

    1.) How does it work

    2.) Preparations

    3.) Version A - Copy&Paste the conveyor method

    4.) Version B - Water on custom objects

    5.) Make it better & Some notes
    -Possible Problems
    -NVFakeWater(+bug description)
    -Apply velocity to player
    -How to rise water + fixing problems with shallow water (very helpful, read it)

    6.) Demo

    7.) More brush features. [Not finished yet]


    0.) Introduction
    This method works with the render pass feature of NewDark. It is very powerful and you can create various effects with it. As I wrote above I made this tutorial 4 months ago and I can't remember everything but I know I wrote everything down I found out, thats why this tutorial is a bit longer than necessary.

    My goal is it to create an object water which comes as close as possible as brush water the NVFakeWater script (included in NVScript.osm) is a big help for it. Thanks to NamelessVoice for creating it (even if it has an annoying but - which I will explain later and tell you a work around.) I explained the basics on how to create simple objects but as I said my goal is it to make as realistic (brush like) as possible means water stims, velocity to player and objects and points I have forgotten at the moment. Until know I didn't succeed in all points but for example add velocity to the player while hes in the water is easily doable.
    Note: Nearly everything below this line is 4 months old and I just checked roughly thought it again. So for those who check it please tell me when you find something that is different to understand or mistakes.

    There are 2 methods to create object based water (of course both can be used).

    Version A - Bitmap&Conveyor Version:
    A flat surface which is very easy to customize

    +Easy to use
    +No size restrictions

    -No different waterout texture

    Version B - Object Version:
    Animated water flowing on other objects - Includes animated water as replacement texture.

    + Complex Shapes
    + WaterOut Texture
    - Animated Replacement Textures

    - restricted to object size
    - Needs more textures & .mtl files

    I will also explain to you how this water can behave nearly like real water: You can swim, drown and get moved. Check 5) for these Points


    1.) How does it work?
    The basic principle behind this "NewWater" is the use of material(.mtl) files and their amazing render pass options. (Oh praised be the builder of NewDark).
    We will use conveyors(which can't handle animations itself) and a texture which will animated via the .mtl file.


    2.) Preparations

    2.0 Maybe get some nice water textures first?
    I for example at the moment I use the water vurt made:
    Get it here:


    2.1 It's very important that we don't use terrain textures in \fam so copy every water texture you want to use - you find them in: \fam\waterhw\
    and paste them in another folder for example:


    You can basically past them wherever you like but putting them in tex will keep your obj or bitmap folder less cramped.
    For the following I will make an example for the blin water type saved in tex\textures you have to do the same steps for your textures respectively.


    2.2 Now we need for every water type a representative texture
    Copy blin + blin.mtl(if you have that) and paste it into:

    bitmap used for Version A
    obj\txt16 used for Version B

    If you have no .mtl file for your texture create an empty text document and rename it to blin.mtl (or in general YourFirstTexture.mtl)

    If you use Version B (custom models or replacement texture) and you want different to use different flow speeds you need additional blinX + blinX.mtl files
    More infos look at 2.4


    2.3 The material file Version A
    Open one of your .mtl in bitmap file and copy the following lines into it:

    render_material_only 1
    render_pass {
    texture *_ 0 "tex\textures\blin"
    ani_rate 60
    env_map 0.03 2 tex\envmaps\vurt_envmap1

    -First you have to modify the texture line so that the ".\..\" part fit's your texture location.

    -Second you have to check this *_ the star enables animation and the '_' describes your file prefix. I think it's the best if you look at these examples

    texture * 3 "tex\blink00" ; will only load "blink00" "blink01" "blink02"
    texture * 0 "tex\ledsequence" ; will load "ledsequence" "ledsequence1" "ledsequence2" etc.
    texture *_ 0 "tex\ledsequence" ; will load "ledsequence" "ledsequence_1" "ledsequence_2" etc.
    texture *_ 0 "tex\ledsequence_" ; will load "ledsequence_" "ledsequence_1" "ledsequence_2" etc.
    texture *_ 3 "tex\blink00" ; will only load "blink00" "blink00_1" "blink00_2"
    texture *_ 3 "tex\blink00_" ; will only load "blink00_" "blink00_1" "blink00_2"

    -env_map is an environmental map used for special effects like reflections I'm using the one vurt provide. Look at 2.0


    2.4 Material file Version B
    Open one of your .mtl in obj\txt16 file and copy the following lines into it:

    render_material_only 1
    render_pass {
    texture *_ 0 "tex\textures\blin_"
    ani_rate 60
    uv_mod scale 0.25 0.25
    uv_mod scroll 0.25 0
    env_map 0.03 2 tex\envmaps\vurt_envmap1

    -If you didn't read 2.3 read it first.
    -uv_mod scale : Scale x y values of your texture 0.25 is the same as brush water. Smaller numbers are the same as zoom in => bigger texture
    -uv_mod scroll : This defines the flow speed of your water texture in X and Y direction. 0.25 is equivalent of a flow speed of 4 DromEdUnits (0.5=8DU)
    Exactly it is defined as UVTiles per second.

    -You need for every different flow speed or scaling another representative texture + .mtl file.
    -You can also rotate your object by for example 90° to get the same change on the Y-Axis


    3.) Version A - Copy&Paste the conveyor method
    You already finished most of the work everything that is left is creating our object.

    But maybe we should first take a look at the conveyor object from miss16 in Soulforge Cathedral to understand how conveyors work.
    You will find it in the object hierarchy under physical\TerrainLike\Conveyor(-2409)\ConvTop20x4(-6429)

    We will create our water object with the same setup

    3.1) Create your object
    -For example create a new archetype at SFX\ and name it FakeWater
    -Create another (sub)archetype and name it FakeWaterConv
    Do not create it under physical that could generate some problems with jumping in the water like player gets stuck or revives damage from high falls. You can try it's kinda mehh

    And now double click on your archetype to edit it


    3.2) Settings

    First we will take a lock at the most important settings of conveyors.

    3.2.1 Important Settings

    1) Shape->Model Name
    The standard ConvTop20x4 has convey00 as model BUT convey00 is no model it's actually a texture you can find in res\bitmap.crf

    Press Add: Shape->Model Name->blin_

    2) Object Size
    The object size and tiling can be adjusted very easily it's done via
    Renderer->Bitmap Worldscale

    •x/y size: This defines how big your object is in DromEd units
    For the moment set it to 8x8 or 16x16

    •x/y feet per tile:
    This defines the scaling of your texture the lower the value the more you zoom out => texture get smaller
    The bigger the more you zoom in => bigger texture
    Real brush water has approximately a x/y feet of 16 (maybe bit more)

    •Check Double Side if you want to bottom side to be rendered as well, only needed if the player can get into the water.
    (•Optional check Lit as well do some Objectcast Lightning test and decide if you want it or not)

    3) The Flow
    Ok finally make it move:
    Add Physics->Model->ConveyorVelocity
    Since this is just the archetype you might just leave it as 0,0,0
    And adjust the flow value on your concrete objects.

    Sadly just the X-Value is accepted so you have to rotate your object by 90°.
    In this situation be sure to read 5) because there is a bug with the NVFakeWater and if by any chance you can't change the dimensions you can still apply material flow via another texture-> see version B.

    3.2.2 Other Settings


    -Renderer->Transparency (alpha)

    If you want that the player can swim in the water you have to change these as well:
    -Physics->Model->Type: OBB

    You have to adjust the X/Y values so that they match the x/y size from Bitmap Worldscale and the Z value how deep you want to have the water.
    Important: You have to set your Offset-Z to -0.5 * Size-Z because the surface is originally the center of you object.
    So maybe just use
    •Offset-Z = -2
    •Size: 16,16,4 for the start

    Mark Location+Rotation

    -Add S->Scripts: NVFakeWater
    This will make your object behave very close to brush water, it makes sounds and you swim+drown

    Check 5.) For some additional properties and for example how to fix intersections.
    Have fun with it


    4.) Version B - Water on custom objects
    You did almost everything in preparations especially in 2.4 Material File
    When you create your objects be sure to add the same properties as mentioned above in '3.2.2 Other Settings'

    With these material files you can assign your texture on objects with replacement texture and it will be animated.


    5.) Make it better & Some notes

    a) Possibly problems:

    a) Intersections
    Description: When you have intersections there will be a darker area or wrong render effects
    Solution: Move one of the object a bit higher 0.01 and give it this property: Renderer->RenderOrder: PostOpaque 1 (first)
    When you have more than 2 objects give the highest PostOpaque 1 and the ones below 2 etc.

    b) Getting out
    It's sometimes not so easy to climb out of the water you could either try to modify the surface high or even better place some ladders.


    b) The NVFakeWater script
    This is a very nice script NamelessVoice made ( if you don't have it download it here: )
    it provides very good sound effects:

    -Footsteps when only the players feet are in water
    -SplashSounds+Slowing down the player when hes walkin in water
    -You can swim in the object

    As might have recognized when you dive in the fake water it feels different from brush water. Thats because brush water darkens your view.
    NV solved this with attaching a transparent colored sphere to the players head you will find the model in the demo it's called: InWater.bin (uses InWater.gif)

    To use it create another archetype under:
    Objects\SFX and name it InWater (another name won't work!)
    And add these properties:
    -Shape->Model Name: InWater
    -Renderer->Transparency(alpha) 0.3
    -Active (check)
    -Particle Animation: launch continually
    Press Ok.

    About Bug in the NV Script
    Sadly I experienced a bug with the NVFakeWater it can't handle object rotation. For example a 32x16 object rotated by 90° to a 16x32 will still have it's fake water features(sliming+sound) still like the original 32x16.
    In these cases use big enough square dimensions like 12x12 so that it still works correctly.

    Have fun swimming


    c) The base texture
    With the base texture I mean the textures you saved in your bitmap or object folder. They don't need to be the same texture as your imagies in tex\textures
    they can as well be a 32x32 transparent texture. The only important thing is that theres a texture with a .mtl file. To save space it would be good idea to replace this images with something smaller.


    d) Check the material-format.txt in the doc folder to learn more the material files and their overwhelming potential.


    e) Applying velocity to the player

    That's still a point which is missing and it's not so easy but I will explain to you how you can get at least the player moving. In general you can apply constant speed to the player when you add to him the Physics->Model->Conveyor Velocity ability objects via: Physics\Model\Control.

    I tried around applying velocity to objects as well but it's not that easy and until know I haven't found a flawless method. Maybe you can help me and try a bit around as well.


    (Be sure to have NVScript loaded)
    You need a MetaProperty for every different speed (if Metas are new for you go into ObjectHirarchy and seletct ShowTree: Metaproperties at the Top)
    Add to each new MetaProperty the Physics->Model->Conveyor Velocity with the values you want to have.


    Version a - The Room method (has nothing to to with the A,B types in 1-4.)
    Useful when your water is mostly immovable and for example active after you pressed a certain switch like the flood canyon in the demo. This method has a limited usage but shouldn't make any problems.

    Go again in the ObjectHirarchy and select ShowTree:Rooms
    -Select BaseRoom and press Add and name the NewRoom Type: FlowRooms
    -Now you're asked if it should be a concrete room -if you don't know what it means press yes.
    -Edit FlowRooms and add the following property:
    S->Scripts: TrigRoomPlayer
    -We need now one concrete room for each velocity. (Write down their numbers we need them 3 steps later)
    -Now you can place the room in the world. You got the wrong or default room you can change the type easily. Press create at the bottom of your normal DromEd window and select the correct room type and press the create button on the right.

    -But wait how do we add the MetaProperty to the player? For that we need 1 RequireAllTrap(RAT) and 1 Marker for every different room/velocity type.
    -Select your RequireAllTraps, press Links and create a ~ControlDevice FROM your RAT TO one of your rooms
    -Add the other incoming CD links to your RAT for example from the switch that opens the floodgate
    -Make a CD from the RAT to the marker

    -Select your marker and add the follwoing properties to it:
    S->Script: NVMetaTrap
    Editor->DesignNote: NVMetaTrapMeta=XXX;NVMetaTrapMetaTarget=player

    For the XXX you have to write either the number of your Metaproperty like -7654 or the "name from object hierarchy" with "

    That was it now the player should move on it's own when he enters the water.


    Version b - The object method

    Use this for raising/moving water.

    -Create your FakeWaterObject
    -Open Physics->Model->Attributes and mark Flags: Is EdgeTrigger
    -Add S->Scripts: NVTrigOBB
    -Add Editor->DesignNote and copy these lines:

    For the XXX you have to write either the number of your Metaproperty like -7654 or the "name from object hierarchy" with "

    NOTE: If you have intersection with more than one water object there could be problems with the InWater-Mask from the NVScript.
    Solution: Make one big OBB (invisible) object which will be your water and give the others which will be your surface a dimension of 0 or remove the NVFakeWater script. To do that add S->Scripts clear the fields and check don't inherit. (Sorry after that long time I'm not quite sure what I meant with the "or remove the script part")


    f) How to build rising water + shallow fix

    With our new water some of you maybe want to have a water which rises from shallow to a specific level under the condition that the player gets flown away when the water is rising. The problem is with our method mentioned above the player moves when just standing on shallow water.

    I found various solutions how to fix shallow water but I want to present the best to be more exact I present two solutions for different situations:

    When to use which:
    •Option A works nearly always only condition is that if the player is in the shallow water it may not be higher than 1.5 units above the ground.(3.5 when the player is not crouching)

    •Option B covers the situation of other highs when the player is inside/standing in the water only restriction is that he may not be able to leave the area until he swims.


    1) Preparations:
    First we need a MetaProperty which enables the flow effect. I named it for example EnableFlowMetas
    Add the following property to the MetaProperty:
    S->Script: NVMetaTrap2

    Yes NVMetaTrap2. You also have to make sure that your water objects don't have this script.

    Create your switches/buttons which trigger the movement. I will explain the setup via TerPoints if the player can not see the water surface when you change it you can also move it directly via teliameds TrapMoveRelative script by defined z values.
    I don't know what for idea you have in mind so maybe you have to play around with the parts I give you:
    Let me know if you have another method.


    Option A
    Create your water objects like in the demo with these scripts
    -S->Scripts: NVMetaTrap

    Be sure that NVFakeWater is placed on archetype of the object or above. Scripts will get inherited (as well as DesignNotes) so you don't have to set them again and you can delete wahts already written in it when you add a new one.

    NVMetaTrapMeta="FlowMeta8X";NVMetaTrap2Meta="FlowMeta8X";NVMetaTrapTarget=player;NVMetaTrap2Target=player;NVTrigOBBPlayer=1; NVTrigOBBTDest="[me]"; NVTrigOBBTOn="PlayerSwims"; NVTrigOBBTOff="PlayerLeaves"; NVMetaTrapOff="PlayerLeaves";NVMetaTrap2Off="PlayerLeaves";NVMetaTrapOn="Null";NVMetaTrap2On="PlayerSwims";

    You have to change NVMetaTrapMeta= to either the number of your Metaproperty or the "name" with ". NOTE: You have to write it TWO times.
    -Be sure that your object has Physics->Misc->Moving Terrain: False
    -If your water starts in a swimable high add Metaproperties->EnableFlowMeta (or the name you choose in Preperations)

    First I will explain the easy situation with just 2 water highs and below a setup with no limitations.

    Elevator Setup:
    -Create 2 TerrPoints (fnord->Marker->TerrPoint(-1322) place one at the position where you want to have your shallow water surface and the other at the highest position you want to have.
    -Link them together with TPath so that each TerrPoint has a TPath and a ~TPath link to the other - Remember to define the speed in the Links window. Check Path Limit.
    -Link (FROM) your water object TO the TerrPoint you want to start with TPathInit (if your water is not at the correct position execute the command reset_moving_terrain
    -Create two buttons and ControlDevice(CD) link each one to one of the TerrPoints.

    Getting serious: The Markers/Traps
    -Create 2 Markers - Best place them asside of the buttons.
    -Give both S->Script: NVMetaTrap
    -Make a CD link from your buttons to one of the markers
    -Link each marker with a CD flavour to your water object

    -Now add Editor->DesignNote:
    For the raising Marker you need this line:

    For the lowering Marker this one:

    The only restriction for Version A is that if you want to raise the water while the player is INSIDE of it then the shallow water should not be higher than 1.5 units above the ground. It can be up to 3.5 above but only when the player is not crouching. I don't know how many players would try it out to crouch in the water and then press the button. I give you these two values it's your decision what to do.

    Option B
    Use this when you have a shallow water surface high above 1.5 over the ground and when the player is definitely inside of the water when he triggers it and he may not be able to leave the area until he swims!
    The different to version A is that we just apply the player movement automatically and not when he enters the object.

    The setup is the same as in A so do this first.

    Additionally do this:
    -Add to the raising markers a NVMetaTrap2 script, this will enable the player movement automatically.
    -Add to the DesignNote this:

    Set the NVMetaTrap2OnDelay (in ms) to a value so that it seems fitting that the player gets flown away, of course it depends on the raising speed of your water


    6) Demo: Download Link

    It's a bit big because I added vurts water textures to it.

    I have a new computer and have no thief installed yet so I can't do a last test if I added all models, textures so if anything is missing please write it so I can add it in the next version. I also know that this demo is not finished yet. For example I wanted to add an example of the setup I have in my map which has - if I remember right - 9! different water highs and two different flows. It used a lot of QVarTraps and stuff, basically just for simple calculations.... Gosh I want a script for that that would be much easier

    7) Other features [Not finished yet]
    Like water stims, applying velocity to objects. These points are up do some degree possible but I haven't found ways to make it work properly in all cases. One if the main problem is that as far as I know you can't get hold the entering object when a PhysEnter is triggered, or can you?
    Thanks to vurt(textures) and NamelessVoice(NVScript)
    Feel free to redistribute.

    If you have any question feel free to contact me(Daraan) @
    Last edited by Daraan; 17th May 2016 at 16:08.

  2. #2
    Registered: Aug 2007
    Location: LosAngeles: Between Amusements
    Great work!

    On question though, why use replacement textures? As long as you are modeling the object, why not use normal animated textures on it?

  3. #3
    Registered: Jan 2012
    Location: Gèrmany
    Quote Originally Posted by LarryG View Post
    Great work!

    On question though, why use replacement textures? As long as you are modeling the object, why not use normal animated textures on it?

    I'm not quite sure at which part of the tutorial you are referring to.
    Normal animated textures doesn't work on conveyors. If they would that be great and would make things much easier. Would be great to see that in a new NewDark version. So you have animate the texture via the material file using render pass.

    If you just mean the replacement on normal objects(Version B). Sure it's possible to do that and I think I included a basic square model with blin/blout texture in the demo. But making models for the various water types and even more models for the different flow speeds. to much work - well not that much but the replacement way is much faster.

    But I'm still not sure if I got it what you meant.

  4. #4
    Registered: Aug 2007
    Location: LosAngeles: Between Amusements
    I meant replacement on normal objects (Version B). Using standard rescube objects can result in oddly stretched/compressed textures as you change the dimensions in DromEd to fit your needs. So I would think that custom building the object and texturing it would be a better way to go. And as long as you are doing that, then why not just apply the correct texture when you make it?

  5. #5
    Registered: May 2003
    Is it possible to repackage the demo so it is usable with Darkloader also? Thank you!

  6. #6
    Registered: Aug 2002
    Location: Siberia, Russia
    Mirror: (usable with DarkLoader).
    Last edited by clearing; 9th Aug 2013 at 11:09. Reason: new version

  7. #7
    Registered: Jan 2012
    Location: Gèrmany
    Thanks @ clearing
    Didn't though about packing

    Like I said I wanted to include the setup I use in my map but I decided to improve it. The basic setup is that you have 2x3 floodgates to regulate the incoming and outgoing water. In my map I take advantage of the fact that the player can't see the water when it's rising and so I can do a lot stuff in the background without the player realizing. So I always reset the water high to 0 and move the surface up via telliamed's TrapMoveRelative. Now I wanted a system that seamlessly changes the water highs. Easier said then done. My plan was to get the difference between between the two water highs and then change it accordingly. But somehow it failed with down movements. I had negative QVars and I got NVMath Errors thrown at me
    So I decided to create it completely new. That was a big *****. With every problem I fixed I created a new one and in the end I ended up with more than twice the amount of traps I used in the setup I had first. But that happens when I think about the possible mistakes that could happen and how to prevent them....But It's done

    So what's so special about this system?
    -Controllable water high via floodgates, easily changeable to more or less
    -seamless change between the different water highs
    -player gets affected by various flow effects at different highs
    --for example at wrist high the movement speed is reduced to 80% at about head high he gets drifted away.
    -Prevents from opening inflow water when no outgoing floodgate is opened and reverse
    -Nearly foolproof*


    I won't document what you have to do because that would be to long. But I added a .cow and a .vbr both with only the necessary changes for the gamesys.
    To summarize it you need to add 9 metaproperties, 5 traps and 3 SFX into your gamesys.

    For easier customization I added 3 variables: BaseValue, IncreaseValue, DecreaseValue(1 value is equal to 0.1 DromedUnits)
    You can modify them via Editor->Mission Quest Data or via command quest_create/edit_mis XYZvalue
    -BaseValue is the value that will be added by default when you open the first gate.
    -In/decreaseValue define the change when you open an incoming/outgoing gate. Closing will reverse the effect.

    *I use levers for this system but as you might now levers are sometimes dangerous because you can mess with them by double activating them, thats why I often use the JumpSwitcher script instead of StdLever. But JumpSwitcher doesn't work as well thats why I sent the signals on a detour. It's not absolute save but hard to really destroy it. It would be save if you would use buttons instead but you need to stop them from activating more than once.

    Download new version:Link
    (should be darkloader compatible but didn't test it because I don't know where to get the newest version)

    Changes in the map:
    -Added the system I talked about
    -Small fixes here and there. For example the first workaround for the NVFakeWater bug and the elevator rising system Version A works now (there was no EnableFlowMetas metaproperty).
    Last edited by Daraan; 13th Jan 2014 at 10:27. Reason: Added missing files

  8. #8
    Registered: Jan 2012
    Location: Gèrmany

    Fake Water Ultimate Edition

    It's done -finally- just finished the FakeWater System in my mission I wonder if anyone will ever use it but I don't want to hold it back.

    Ultimate Version Features:
    •Combined Rising(OnlyPlayer)+ObjMoving System from the last Demo --> Dynamic Rising with Player&Obj Movement. (4fixed levels+Off)
    •Additionally Flow directions can be changed & special flows to specific brushes.

    It's like the furthest you can go at the moment. Only things that could improve this would be a (NV)SetPropertyScript with vector support which could handle QVars as well. Would slim the system and could react more dynamic. TOn="[$QVar]Stim" would also help.

    The setup might look a bit overwhelming but can be broken down into simple parts:

    Changeable Flowspeed for 4 predefined levels and directions
    Special Flowspeed and possible direction changes

    Every system works like an optional upgrade to the BaseRisingSystem, like a program it starts at the bottom and moves step by step upwards.
    More extra stuff in the ReadMe II.3.3 like easier setup via AutoLinker or DrowningRobots. Screenshot It's easier than It looks and most of it is automated.

    Beside the demo and ReadMe there is also a .dml and a clean multibrush included for both the Advanced 3.11 and basic 3.3 Version. Short test showed that the basic still works just reverted to an earlier save.

    Easy Install:
    Create Archetypes
    Use dml (+lil manual changes for robot drowning)
    import Multibrush
    Change QVars and TrigQVars flowspeeds(FWStimTrap/FWChangeTrap) to your liking
    Link to door/levers

    Download: Fake Water Ultimate v3.11
    There was a file missing: put into obj folder, also rename bitmaps\ to

    Have fun! If you have any problems lemme know.
    Last edited by Daraan; 18th May 2016 at 09:36.

  9. #9
    Registered: Aug 2007
    Location: LosAngeles: Between Amusements
    Sounds awesome but a heck of a lot of work.

  10. #10
    For the darkening effect, one can also use a coloured overlay (Renderer->Camera Overlay). I used that when I wrote my dynamic water script for Heartcliff Islands, and found it easier to control and tweak.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts